Moisture analyser KERN DLB 160-3A

DLB 160-3A

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Mains adapter: 230V/50Hz in standard version for Germany. On request GB or USA version. Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing

More details

In Stock

By buying this product you can collect up to 105 loyalty points. Your cart will total 105 loyalty points that can be converted into a voucher of 21,00 €.


1 053,00 €

-10%

1 170,00 €

Add to wishlist

Data sheet

Weighing range [Max]160g
Readout [d]0,001g / 0,01%
Weighing plate dimensions100 mm
Weighing units% rH g

More info

  • Backlit LCD display, digit height 17 mm
    • Current moisture content in %
    • Unit of the shown result, e.g. moisture
    • Drying process active
  • Halogen quartz glass heater 400 W
  • Internal memory for automatic sequence of 5 complete drying processes
  • The last value measured remains on the display until it is replaced by a new measurement
  • 10 sample plates included
  • Protective working cover included with delivery
  • Application handbook: On the internet, you will find a practical application handbook containing many examples, field reports, settings and tips for each KERN moisture analyser

The moisture analyser for heavy, high-volume samples KERN DLB 160-3A

  • Readability [d]: 160 g
  • Weighing capacity [Max]: 0,001 g/0,01 %
  • Reproducibility, weight of sample 10 g: 0,05%
  • Display after drying
  • Moisture [%] = Moisture content (M) from wet weight (W): 0–100 %
  • Dry content [%] = 100–0 %
  • Dry weight (D) from W 100–0 %
  • ATRO [%] [(W-D) : D] · 100%: 0–999 %
  • Moisture content (M): Absolute value in [g]
  • Temperature range: 35 °C–160 °C in steps up to 1 °C
  • Drying modes: Standard drying, Drying in levels, Rapid drying
  • Switch-off criteria
  • · Automatic unrestricted switch-off (Selectable loss in weight 0,01% – 0,1% in 30 s)
  • · Time controlled switch-off (1 min – 12 h)
  • · Manual switch-off at the press of a button
  • Log output:
  • · Continuous output (residual weight)
  • · At the end of the drying process, manual or automatic
  • Input voltage: 220 V - 240 V AC 50 Hz
  • Overall dimensions W×D×H: 210×340×225 mm
  • Net weight: approx. 4,2 kg

Reviews

No customer reviews for the moment.

Write a review

Moisture analyser KERN DLB 160-3A

Moisture analyser KERN DLB 160-3A

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Mains adapter: 230V/50Hz in standard version for Germany. On request GB or USA version. Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing

3 other products in the same category:

Download