Belt Clip for HEINE BETA handle

HEINE BETA Handle Module without bottom insert

The handle module X-000.99.010, 145 mm x 30 mm dia., is the basis of every HEINE BETA handle. By adding the appropriate bottom inserts it is possible to assemble any of the handles shown on this page. A BETA battery handle can also be converted to a rechargeable handle in this way.

All BETA handles feature short-circuit protection and a continuous ceramic brightness control.

Adapter set (two pieces) for HEINE NT4 table carger

For charging HEINE BETA4 SLIM NT and F.O.4 SLIM NT Laryngoscope rechargeable handles

HEINE BETA4 SLIM NT bottom insert

Bottom insert for HEINE BETA Battery handle

HEINE USB cable for E4-USB power supply

Medical approved plug-in power supply with 5 V and 500 mA; the primary plug is interchangeable (EU, UK, AU, US)

Extension cord from HEINE plug-in transformer UNPLUGGED to mPack UNPLUGGED, 2m

• Dimensions: 135 mm x 19 mm dia. Weight: 180 g.
• A compact handle with automatic connector for those who prefer a slim handle.
• for 2 alkali-manganese batteries, size AA
• Batteries not included.

HEINE BETA battery handle feature short-circuit protection and a continuous ceramic brightness control.

2.5V (batteries not included; appropriate batteries: IEC LR14)

With this set, existing HEINE mini 3000 handles can be updated to the 2.5 V rechargeable system

• HEINE mini NT table charger
• 2 rechargeable batteries HEINE NiMH 2Z
• 2 bottom inserts for HEINE mini 3000 rechargeable handle

Compact charging technology

Innovative, compact design. Practical and space-saving.

Two independent charging wells. Complete functionality for one or two handles at a time.

Fast charge feature. Typ. 4 hours to recharge a mini 3000 NiMH 2.5 V rechargeable battery.

Automatic charging. Independent of the state of charge of the rechargeable battery. Guarantees extended battery life.

Cannot be overcharged. Charger switches off automatically when the battery is fully charged.

Charge status indicator. Light pulses from the charging well to confirm the charging mode. Continuous light indicates that the charging process has been completed.

No memory effect. Full power at any time without loss of capacity.

HEINE Bottom insert for mini 3000 Rechargeable Handle, only

Can be attached to any HEINE 3.5 V power source to illuminate any HEINE fiber optic instrument, e.g. anoscope, proctoscope or sigmoidoscope.

Bottom insert for rechargeable handle HEINE BETA4 NT

Bottom insert for rechargeable handle HEINE BETA4 USB

HEINE BETA4 SLIM NT rechargeable handle complete with rechargeable battery M3Z 4NT Li-ion and bottom insert

Dimensions: 135 mm x 19 mm Ø. Weight: 180 g

A compact handle with automatic connector for those who prefer a slim handle.

Rechargeable in NT4 table charger fitted with the small adapter ring.

Dimensions: Width 142 mm, Height 61 mm, Depth 66 mm, Weight 235 g

• Innovative, compact design. Practical and space-saving.
• Two independent charging compartments. Complete functionality for one or two handles at a time.
• Automatic charging. Independent of the state of charge of the rechargeable battery. Guarantees extended battery life.
• Cannot be overcharged. Charger switches off automatically when the battery is fully charged.
• Charge status display. Light pulses from the charging compartment to confirm the charging mode.

without handle

HEINE NT 300 table charger

for BETA handles and Laryngoscope handles Angled F.O., Standard F.O., Small and Short F.O. (without handle, with adaptor)

Not compatible to BETA4 NT!

Rechargeable handle complete with:

• Li-ion rechargeable battery
• HEINE BETA 4 USB bottom insert
• HEINE E4-USB medical approved plug-in power supply
• handle rest

HEINE BETA L Rechargeable handle complete with Li-ion rechargeable battery and bottom insert for NT 300 table charger

• Rechargeable handle with Li-ion battery. Fast charge in 2 hours with the NT 300 charger.
• Rechargeable handle with charge status display in the bottom insert.
• Display lights for 10 seconds when the handle is switched on or removed from the charger.
• No memory effect. Full power at any time without loss of capacity.
• Updates: Existing 3.5 V BETA handles can be converted to BETA L by substituting the
• Li-ion L battery and BETA L bottom insert.
• Compatible with previous chargers (NT 200).
• Ready-to-use Function: If the handle is switched on when replaced in the charger, it automatically switches off. When removed, it switches on again at the previouslyselected brightness

rechargeable handle complete with Li-ion rechargeable battery and BETA4 NT bottom insert

without table carger

Headband-mounted rechargeable battery for OMEGA 500 Ophthalmoscope and ML4 LED HeadLight (System voltage 6 V).

• Lightweight with balanced weight distribution. High level of comfort.
• Charge status display. Display of remaining operating time.
• Can be recharged by wall- or plug-in transformer.
• Direct operation possible while charging through the use of the mobile plug-in transformer.
• Charging time: 2 hours.
• Operating time: 3.5 hours for ML4 LED HeadLight, 2 hours for OMEGA500 UNPLUGGED, 8 hours for OMEGA500 UNPLUGGED with LED.
• Intelligent charging system. Automatic changeover from operating to charging mode (in the wall unit).
• Top safety standards. Integrated charge and performance checks during operation. Lithium polymer technology. UL-compliant.
• Registered Design

Headband-mounted rechargeable battery for OMEGA 500 Indirect Binocular Ophthalmoscope UNPLUGGED and ML4 LED HeadLight UNPLUGGED (System voltage 6 V).

• Lightweight with balanced weight distribution. High level of comfort.
• Charge status display. Display of remaining operating time.
• Can be recharged by wall- or plug-in transformer.
• Direct operation possible while charging through the use of the mobile plug-in transformer.
• Charging time: 2 hours.
• Operating time: 3.5 hours for ML4 LED HeadLight, 2 hours for OMEGA500 UNPLUGGED, 8 hours for OMEGA500 UNPLUGGED with LED.
• Intelligent charging system. Automatic changeover from operating to charging mode (in the wall unit).
• Top safety standards. Integrated charge and performance checks during operation. Lithium polymer technology. UL-compliant.
• Registered Design

Compatible transformer 100 – 240 V incl. 4 plugs for world wide compatibility: EU, USA, GB, AU