Home

New products

    KERN DLB 160-3A Moisture analyser 110V
    • KERN DLB 160-3A Moisture analyser 110V
    • KERN DLB 160-3A Moisture analyser
    • KERN DLB 160-3A Moisture analyser
    • KERN DLB 160-3A Moisture analyser

    KERN DLB 160-3A Moisture analyser 110V

    Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing

    TECHNICAL DATA

    Weighing capacity [Max]160 g
    Readability [d]0,001 g
    Weighing systemStrain gauge
    Temperature [Min] (°C)35 °C
    Temperature [Max] (°C)160 °C
    Stabilization time4 s
    Unitsg, mg, % rH, % Dry mass
    Reproducibility0,001 g
    Linearity± 0,003 g
    Readability moisture [d] (%)0,01%
    Drying modesStandard drying, Rapid drying
    Switch-off criteriatime controlled, automatic, manual
    Input voltage device / power [Max]110 V; 50/60 Hz
    Product groupMoisture analyser
    Read Reviews Write Review
    Calibration
    €1,655.00
    Tax excluded
    in stock
    Payment
    discover visa googlewallet paypal mastercard americanexpress
    • Backlit LCD display, digit height 17 mm
      • Current moisture content in %
      • Unit of the shown result, e.g. moisture
      • Drying process active
    • Halogen quartz glass heater 400 W
    • Internal memory for automatic sequence of 5 complete drying processes
    • The last value measured remains on the display until it is replaced by a new measurement
    • 10 sample plates included
    • Protective working cover included with delivery
    • Application handbook: On the internet, you will find a practical application handbook containing many examples, field reports, settings and tips for each KERN moisture analyser

    The moisture analyser for heavy, high-volume samples KERN DLB 160-3A

    • Readability [d]: 160 g
    • Weighing capacity [Max]: 0,001 g/0,01 %
    • Reproducibility, weight of sample 10 g: 0,05%
    • Display after drying
    • Moisture [%] = Moisture content (M) from wet weight (W): 0–100 %
    • Dry content [%] = 100–0 %
    • Dry weight (D) from W 100–0 %
    • ATRO [%] [(W-D) : D] · 100%: 0–999 %
    • Moisture content (M): Absolute value in [g]
    • Temperature range: 35 °C–160 °C in steps up to 1 °C
    • Drying modes: Standard drying, Drying in levels, Rapid drying
    • Switch-off criteria
    • · Automatic unrestricted switch-off (Selectable loss in weight 0,01% – 0,1% in 30 s)
    • · Time controlled switch-off (1 min – 12 h)
    • · Manual switch-off at the press of a button
    • Log output:
    • · Continuous output (residual weight)
    • · At the end of the drying process, manual or automatic
    • Input voltage: 220 V - 240 V AC 50 Hz
    • Overall dimensions W×D×H: 210×340×225 mm
    • Net weight: approx. 4,2 kg
    DLB 160-3A110V