Categorías

Inicio

Left Banner

  • HEINE Catalogo general 2025

Analizadores de humedad

Analizadores de humedad

Analizadores de humedad

Filtros activos

KERN DAB 100-3 Determinador de humedad
  • -10%
KERN & SOHN GmbH KERN DAB 100-3 Determinador de humedad

Analizador de humedad con pantalla gráfica fácil de usar y 15 memorias para programas de secado

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required..Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc..Data interface RS-232: To connect the balance to a printer, PC or network.GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories.Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model..Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA..Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing the measured value to be calculated..3 years warranty

1.125,00 € Precio normal 1.250,00 €
KERN DAB 200-2 Determinador de humedad
  • -10%
KERN & SOHN GmbH KERN DAB 200-2 Determinador de humedad

KERN DAB 200-2 Determinador de humedad con pantalla gráfica fácil de usar y 15 memorias para programas de secado

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required..Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc..Data interface RS-232: To connect the balance to a printer, PC or network.GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories.Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model..Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA..Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing the measured value to be calculated..3 years warranty

1.080,00 € Precio normal 1.200,00 €
KERN & SOHN GmbH KERN DBS 60-3 Determinador de humedad

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required..Memory: Balance contains memories, e.g. for  tare weights, weighing data, item data,  PLU etc..Data interface RS-232: To connect the balance to a printer, PC or network.GLP/ISO log: the balance displays the weight, date and time, regardless of printer connected.Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model..Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA..Weighing principle: Electromagnetic force compensation: Coil inside a permanent magnet. For the most accurate weighings

Campo de pesaje [Max] 60 g
Lectura [d] 0,001 g
Sistema de pesaje Single-Cell
Temperatura [Min] (°C) 50 °C
Temperatura [Max] (°C) 200 °C
Tiempo de estabilización 3 s
Unidades de medición g, % Humedad , % Materia seca, % ATRO
Reproducibilidad 0,001 g
Linealidad ± 0,003 g
Lectura humedad [d] (%) 0,01%
Perfiles de apagado Desecación estándar, Desecación rápida, Desecación suave, Desecación en etapas
Criterios de desconexión controlado por tiempo, automático, manual
Tensión de entrada fuente de alimentación / electricidad [Max] 220V -240V AC, 50Hz
1.650,00 €