Moisture analyser KERN DBS 60-3

DBS 60-3

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network GLP/ISO log: the balance displays the weight, date and time, regardless of printer connected Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA. Weighing principle: Electromagnetic force compensation: Coil inside a permanent magnet. For the most accurate weighings

More details

In Stock

By buying this product you can collect up to 127 loyalty points. Your cart will total 127 loyalty points that can be converted into a voucher of 25,40 €.

1 270,00 €

Add to wishlist

Data sheet

Power Source220 V - 240 V AC 50 Hz
Weighing range [Max]60g
Readout [d]0,001g / 0,01%
Weighing plate dimensions95 mm

More info

  • Backlit LCD graphic display with digit height 15 mm
  • Drying process active
  • Previous drying time
  • Current temperature
  • Unit of the shown result, e.g. moisture
  • Current moisture content in %
  • Active heating profile
  • Halogen quartz glass heater 400 W Observation window above the sample, useful during initial setting
  • Internal memory for automatic run of 10 drying programs and 100 drying processes already executed
  • The last value measured remains on the display until it is replaced by a new measurement
  • Sample description for up to 99 samples, 2 digits, freely programmable, and is printed in the measuring protocol
  • Date and time display as standard
  • 10 sample plates included Protective working cover included with delivery
  • Application handbook: On the internet, you will find a practical application handbook containing many examples, field reports, settings and tips for each KERN moisture analyser

Moisture analyser KERN DBS 60 with graphics display and 10 memories for drying programs

Technical data

  • Readability [d]: 60 g
  • Weighing capacity [Max]: 0,001 g/0,01 %
  • Reproducibility weight of sample 2 g: 0,15%
  • Reproducibility, weight of sample 10 g: 0,02%
  • Display after drying
  • Moisture [%] = Moisture content (M) from wet weight (W): 0–100 %
  • Dry content [%] = 100–0 %
  • Dry weight (D) from W 100–0 %
  • ATRO [%] [(W-D) : D] · 100%: 0–999 %
  • Moisture content (M): Absolute value in [g]
  • Temperature range: 50 °C–200 °C in steps up to 1 °C
  • Drying modes: Standard drying, Drying in levels, Gentle drying, Rapid drying
  • Switch-off criteria
    • Automatic unrestricted switch-off (Selectable loss in weight 0,01% – 0,1% in 30 s)
    • Time controlled switch-off (1 min – 12 h)
    • Manual switch-off at the press of a button
  • Recall of measurement/ Log output: Interval can be set from 1 s – 10 min
  • Overall dimensions W×D×H: 204×336×167 mm
  • Net weight: approx. 4,6 kg


3 other products in the same category: